The FBTVERTUS CLA406A two-way bi-amplified speaker system incorporates 4 x 6,5” custom woofer with 1,5” voice coil and 1 x 1,4″ B&C HF neodymium driver with 2,5 voice coil. The internal Class D amplifier module constructed in die-cast aluminum delivers 600W for LF, 300W for HF and DSP processor with 8 equalization presets provide unexpected dynamics in a system of these dimensions. The FBT VERTUS CLA 406A shall meet the following performance criteria: frequency response from 65Hz to 20kHz, maximum SPL of 133dB. The FBT VERTUS CLA 406A feature a 0,47″ birch plywood with internal metal bracing and the front shall be protected by a heavy duty metal grille. The control panel provides Level control, HF level, Preset, HPfilter, Gnd lift, 3 status led ( on, peak, prt/limit ), XLR input & link and Neutrik Powercon Cable Duplex for power supply. Via optional hardware it is possible to couple two systems with angles of 0°, 10°, 20° and additional accessories are available for system suspension. It can be integrated elegantly and with minimal intrusion into any environment; it is ideal for live applications, assisted by sub CLA118SA, which for fixed installations.


R49500 
  • Brand: FBT
  • SKU: 418.010FB
  • Shipping: 

Learn More


FEATURES:

  • 2-way bi-amplified line array column system
  • 4 x 165mm (6.5”) custom woofer voice coil 38mm (1.5”)
  • B&C HF neodymium driver with 36mm (1.4”) exit and 64mm (2.5”) voice coil
  • Waveguide FBT large format with dispersion 100 ° H x 25 ° V
  • Frequency response from 65Hz to 20KHz
  • Amplifiers Class D 600Wrms for LF and HF 300Wrms with switching power supply
  • Processor DSP with 8 EQ presets
  • Control Panel with XLR input and link, volume, presets, filter-HP, ground-lift
  • Neutrik powerCON power IN and LINK connectors
  • 12mm (1/2”) birch plywood with scratch-resistant coating
  • 12 attachment points above and below for the optional hardware that allows the installation of hanging or pair two CLA406A with angle of 0 ° - 10 ° - 20 ° in the vertical plane
  • Top side tilted 10 ° for the inclination of two columns without damaging gap between the waveguides for a wavefront extremely consistent over the 18kHz
  • 35mm (1.3/8”) top hat for stand mount facility
  • It is ideal for live applications, assisted by sub CLA 118SA, which for fixed installations

SPECIFICATIONS:

  • Built-in amplifier LF/HF: 600/300 W RMS
  • Built-in amplifier peak LF/HF: 1200/600 W
  • Frequency response: 65Hz - 20KHz -6dB
  • Low frequency woofer: 4x6.5 - 1.5 coil inch
  • High frequency driver: 1x1.4 - 2.5 coil - neodymium inch
  • Maximum SPL cont/peak: 133 dB
  • Dispersion: 100°x25° H x V
  • Input impedance: 22 Kohm
  • Crossover frequency: 1.2 KHz
  • Ac power requirements: 640 VA
  • Input connector: XLR with loop
  • Power cord: 5 mm
  • Net Dimension (WxHxD) : 190x1235x290 mm
  • Net weight: 27 kg
  • Transport Dimension (WxHxD) : 290x1235x390 mm
  • Transport weight: 32 kg